Showing posts with label Time For Tea DT. Show all posts
Showing posts with label Time For Tea DT. Show all posts

Thursday, 25 July 2019

Time For Tea Designs - Ice Cream

Thursday and time for another Time For Tea DT post.
Today is my last DT post for Time For Tea Designs as I'm stepping down from the DT.
I've been there over a year and stayed longer than I had planned. I want to thank Jo for having me on her team and wish her all the best for the future.
Today I'm sharing a card featuring one of  the accessory stamps from the digi set called

I've used the ice- cream cone for my card. I printed it  three times and coloured them with my copic markers.
I scored the Kraft card diagonally on my Scor Pal and matted it onto my card base. I cut a panel of Sprinkles paper to go across my card and rounded it at the corners with my corner rounder. I stuck it down near the top of my card. I raised the ice cream cones on 3D foam pads and spaced them across the panel. I added some choc chips with a copic on the mint ice cream, some sprinkles on the vanilla ice cream and a cherry on the cherry ice cream using a white card candy coloured red and glossy accents added. I went over the ice cream with clear Wink Of Stella.
I printed out the sentiment from the set and rounded the corners on it too and mounted with 3D foam pads.
Some coloured card candy to finish it off.
Perfect for this beautiful summer weather!.

 Image - T4TD Anything Is Popsicle
Colouring Medium - Copic Markers
Scor Pal
Corner Rounder
Sprinkles Paper
Kraft Card
3D Foam Pads
Card Candy
Glossy Accents
Wink Of Stella

Thursday, 18 July 2019

Time For Tea Designs - Butterflies

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a card featuring one of clear stamp sets.
It's called
 
I've used the girl from the stamp set and coloured her with my copic markers. I added a border of the Nitwit Collections Enchanting paper to the top of my card and added some green twine and tied it in a bow.
I stuck the image in the bottom right corner and added one of the sentiments from the set to the bottom left,
Some little green sparkly gems to finish it off.



Image - Time For Tea Designs - Butterflies
Colouring Medium - Copic Markers
Papers - Nitwit Collections "Enchanting"
Twine
Sequins - Lucy's Little Things
3D Foam Pads

Cass xx

Thursday, 11 July 2019

Time For Tea Designs - Pawsome Pets

Thursday and time for another Time For Tea DT post.
Today I'm sharing another card featuring some of the free digital stamps that are in this months
Simply Cards and Papercrafts which is out now.
 
If you missed out on them they're also available to buy in the shop.
 
I've used the bone,cat,dog,books and sentiment for my card this week. I made the border of bones in Word and printed it out. I coloured the bones and all the images with Copic markers.
I drew a line inside the bone frame with a black fineliner and added a panel of patterned paper to the middle.I added the cat,dog and book images with 3D foam pads. I cut the sentiment out with the banner die and added it above the images.

A quick and easy card!
 
 

Image - Time For Tea Designs - Pawsome Pets
Colouring Medium - Copic Markers
Papers - Nitwit Collections
Dies - Crealies Banners
Black Fineliner
3D Foam Pads

Thursday, 4 July 2019

Time For Tea Designs - Simply Cards And Papercraft Freebies

Thursday and time for another Time For Tea DT post.
Today I'm sharing another card featuring one of the free digital stamps that are in this months
Simply Cards and Papercrafts which is out now.
 
This time I used the cat, rug, ball of wool and sentiment.
I decided to make an Eclipse card  and used my ScanNCut to cut out the word PURR from my papers which are Nitwit Collections. I mounted them on 3D foam pads on my card blank matted with purple cardstock and Nitwit Collections paper.
 
I merged the cat on the rug in my editing software and coloured it with my Copic markers along with the ball of wool.
I mounted the ball of wool to the bottom left and the cat and rug to the bottom right.
I cut the sentiment out with the banner dies and added them to the card. Some sequins to finish off.

 
 
Image - Time For Tea Designs
Colouring Medium - Copic Markers
Papers - Nitwit Collections
Crealies Banners
ScanNCut
Sequins
3D Foam Pads
 
 

Thursday, 27 June 2019

Time For Tea Designs - Simply Cards And Papercraft Freebies

Thursday and time for another Time For Tea DT post.
Today I'm sharing a card featuring one of the free digital stamps that are in this months
Simply Cards and Papercrafts which is out now.
I coloured the little dog with my Copic markers to look like a spotty dog. I coloured the cupcake and added some clear Wink of Stella to the icing. 
I matted a layer of my patterned paper onto some purple cardstock and added to my card blank.
I then cut out a rectangle od purple card using my wrapped stitched rectangles and added a circle of patterned paper using the wrapped  stitched circles.
I adhered it to the rest of the card. I mounted the dog and cupcake on 3D foam pads and added at the bottom of the circle. 
I cut out a layered flower from the Stitched Blooms die using the papers and added to the top right of the circle.
I finished it off with the Yappy Birthday sentiment.

Pick up your copy now to get the fabulous freebies.

Image - Time For Tea Designs
Colouring Medium - Copic Markers
Papers - Nitwit Collections
Dies - Memory Box Wrapped Stitched Rectangles and Circles, MFT Stitched Blooms,
Crealies Banners
Wink Of Stella

Thursday, 20 June 2019

Time For Tea Designs - Bonjour Bonnie

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a card featuring one of the new digital stamp releases.
It's called
 
I decided to make my card look like a postcard using the fabulous Nitwit Collections Ooh La La papers. I used the postcard and layered the stamp using my photo editing software. I use Paint.NET  which is fab and free. Get it at /https://www.getpaint.net/
 
I coloured Bonnie with my copic markers and cut her out. I designed the Ooh La La in my SCAL software and cut it out with my ScanNCut x3 and layered it up to get some dimension.
I printed the Poodle sentiment on my paper and cut out using my tag die. I added some dotty black ribbon to the ribbon slider and glued to the top of the tag.
I adhered it to the left of the postcard and then placed Bonnie in the middle on some 3D foam pads.
A few little pink and black sequins to finish.

Bonnie est tres chic!



Image - Time For Tea Designs "Bonjour Bonnie"
Colouring Medium - Copic Markers
Papers - Nitwit Collections "Ooh La La"
Dies - Creative Expressions "Stitched Tags"
Ooh La La  - ScanNCut
Ribbon
Ribbon Slider
3D Foam Pads
Sequins - Lucy's Little Things

Cass xx

Thursday, 13 June 2019

Time For Tea Designs - New Release Preview

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a sneaky preview of one of the new releases.
It's called
 Giant Ice Cream Bonnie
and will be released on the 15th of June.
 
For my project I used this fabulous 3D Ice Cream Van from SVG Cuts. I cut all the pieces with my ScanNCut from pastel coloured cardstock and the panels were cut from Nitwit Collections Slice Of Life papers. I added the vellum windows and glued it all together adding the buttons to the centre of the wheels. 
I coloured Giant Ice Cream Bonnie with my Copic markers and adhered her to the ice cream van with 3D foam.
I found the ice cream clipart and added one of the sentiments to it. Printed it out and made a sign board to stand next to the van.

It looks super cute IRL.
 
 

Image - T4TD "Giant Ice Cream Bonnie"
Colouring Medium - Copic Markers
Brother ScanNCut
SVG Cut File - SVG Cuts "Ice Cream Truck"
Papers - Nitwit Collections "Slice Of Life"
Vellum
White Buttons
White Gel Pen
3D Foam Pads

Thursday, 6 June 2019

Time For Tea Designs - Bee Happy

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a card using the fantastic new stamp and die set called 
 
They are both available to buy in the SHOP now.
It's also available to buy from Create And Craft TV
This is the last of my cards that were featured on Create and Craft.
 
I decided to go for a different colour scheme for this card instead of the usual black and yellow. I did some mirror stamping of the bees and then coloured them with my Copic markers and coloured the baskets and flowers in purples and pinks. 
I trimmed my Nitwit Collections paper down to fit my pink card base leaving a pink strip along the top. I also rounded the bottom right corner.
I then ran a strip of pink card through my paper crimper and stuck this across the middle of the card.
I cut one of the Stitched Hexagons out of a darker pink card and stuck it to the left of the crimped panel. I cut the flower outof the same papers using the MFT Stitched Blooms die and stuck it in the bottom left of the hexagon frame.
I then added the mirror stamped bees to the hexagon frame. I stamped the sentiment and cut it out with the stitched banner die and attached it to the bottom right with 3D foam pads. Some pink sequins to finish,



Image - Time For Tea Designs "Bee Happy"
Colouring Medium - Copic Markers
Papers - Nitwit Collections
Dies - T4TD "Stitched Hexagons" MFT "Stitched Blooms"
Crealies "Stitched Banners"
Marvy Uchida Paper Crimper
3D Foam Pads 
Sequins - Lucy's Little Things

Thursday, 30 May 2019

Time For Tea Designs - Bee Happy

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a card using the fantastic new stamp and die set called 
 
They are both available to buy in the SHOP now.
It's also available to buy from Create And Craft TV

I've made an eclipse card using the stamp set. I cut the word BEE out of my patterned paper on my ScanNCut. I matted the paper on some black card and mounted the word BEE on 3D foam pads. I stamped the Mine sentiment in the bottom right corner along with some of the little hearts. I coloured the little hearts and added some Glossy Accents to them. Finally I added the bee to the top left corner.

Did you manage to catch Jo on Create And Craft TV with her stamps and dies?
She was fantastic. There's a photo of my card on C&C further down.
 
 

Here's the card on Create And Craft!


Image - Time For Tea Designs "Bee Happy"
Colouring Medium - Copic Markers
Papers - Nitwit Collections "Beelightful" 
ScanNCut
Black Card
3D Foam pads
Glossy Accents

Cass xx


Thursday, 23 May 2019

Time For Tea Designs - Toucan Do This

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a card using the fantastic new stamp and die set called 
 
They are both available to buy in the shop now.
 
I used the toucans facing each other from the set and coloured them with my Copic markers. I also  stamped and coloured the branch and 4 of the leaves.
I added some of the patterned paper to may card base leaving a white strip down the left hand side.
 
 I cut out one of the tags and topped it with some of my patterned papers to match the base. I added the branch and toucans with some 3D foam pads. I also added two of the leaves and 3 little yellow flowers. I then adhered it with 3D foam pads at the top of my card
 
Next I cut out the sentiment with my MFT stitched rectangles and added the other 2 leaves and yellow flower.
 
You can get a 10% discount from the shop using the code T4TCASS10 
You can use it as many times as you want for an unlimited time.

 
 

Image - Time For Tea Designs "Toucan Do This"
Colouring Medium - Copic Markers
Papers - Nitwit Collections
Dies - Creative Expressions "Stitched Tags" MFT "Stitched Rectangles"
Yellow Flowers
3D Foam Pads
 

Thursday, 16 May 2019

Time For Tea Designs - Moovellous

Thursday and time for another Time For Tea DT post.
Today I'm sharing a card using the fantastic new stamp and die set called 
They are both available to buy in the shop now.
I couldn't not do these super cute stamps as Heilan Coos (Highland Cows) seeing as I'm from Scotland. So of course it had to have some tartan too.
I coloured the coos with my Copic markers in Heilan coo colours. I also coloured three of the trees from the stamp set.
I added two strips of the tartan card to the top and bottom of my card. I adhered the trees in place and then mounted the coos with 3D foam pads in front og them to give some dimension. I finished it by stamping one of the sentiments in the set. 
Quick and easy card!
Image - Time For Tea Designs "Moovellous"
Colouring Medium - Copic Markers
Paper - Craft Creations "Green Tartan"
3D Foam Pads
Cass xx

Thursday, 9 May 2019

Time For Tea Designs - Toucan Do This

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing a card using the fantastic new stamp and die set called 
 
They are both available to buy in the shop now.
 
I used one of the toucans from the set and coloured it with my Copic markers, matching the beak colours to my papers. I've used this gorgeous paper from the Nitwit Collections Hear Me Roar set. I love the beautiful teal and coral colours. 
I also stamped the branch and some of the leaves and coloured them. I cut a circle of white card using my Lil Inkers stitched circles and adhered it to the centre of the card. I arranged the branch and leaves and added them with some 3D foam pads. Next I placed the toucan in position, again with 3D foam pads. I stamped the sentiment and cut it out with the stitched circles and mounted it with 3D foam. Lastly I added a few of the little sequin flowers to finish it off.
Image - Time For Tea Designs "Toucan Do This"
Colouring Medium - Copic Markers
Papers - Nitwit Collections "Hear Me Roar"
Dies - Lil Inkers "Stitched Circles"
Sequin Flowers - Lucy's Little Things
3D Foam Pads

Cass xx

Thursday, 2 May 2019

Time For Tea Designs - Sneaky Peek

Thursday and time for another Time For Tea DT post.
 
I missed last weeks post as I had a nasty vomiting bug. All better now though, so today I'm super excited to be sharing a sneaky peek of  new stamps and dies that will be available on Create and Craft TV next week on the 6th. Don't forget to tune in to see Jo demonstrating all the new stamps and dies.
These stamps are called 
Bee Happy 
The have coordinating dies, and there is also and extra set of hexagon dies and a honeycomb stencil


I inked the backround using Squeezed Lemonade and Spiced Marmalade Distress Oxides. I then spritzed the honeycomb stencil with water and placed it down on the inked panel and pressed down with a clean sheet of paper. I removed the stencil and the water had lifted the ink from where the stencil was.
I cut the panel out with my Wrapped Stitched Rectangles. I stamped the little bee and coloured it with my Copic markers. I then cut it out using the coordinating dies. I stamped the little stitched heart and mounted the been on 3D foam tape beside it.
I stamped and coloured the honeypot and mounted it with 3D foam tape.
Next I stamped one of the sentiments and cut it out with my banner dies. I finished it with some little hearts stamped in Spiced Marmalade ink and some clear Wink Of Stella on the bee wings.


Images - T4T Designs "Bee Happy"
Colouring Medium - Copic Markers
Inks - Distress Oxides "Squeezed Lemonade and Spiced Marmalade"
Dies - T4T Designs "Bee Happy" Memory Box "Wrapped Stitched Rectangles"
Crealies "Banners"
Stencil - T4T Designs "Bee Hive"
Clear Wink Of Stella
3D Foam Tape

Don't forget we also have an anything goes challenge running on the T4T Designs Community page and Instagram. Just tag your entry with @timeforteadesigns

Cass xx




Thursday, 18 April 2019

Time For Tea Designs - Hoppy Easter

Thursday and time for another Time For Tea DT post.
 
Today I'm combining the mobile phone which is one of the accessory stamps from the Bonnie Hey Friend digi collection, and one of the cute bunnies from the Some Bunny Loves You  digi collection. They are both available in the T4T Designs shop .
 
I merged the bunny with the mobile phone in Word, printed it out and coloured with my copic markers.  I added a mini white pom pom for his tail.
I printed the Hoppy Easter sentiment on some white card and trimmed it down to fit the card base.
I added wide strip of the Nitwit patterned paper to my white card and mounted it on some pale yellow card. I then added the image using 3D foam pads.
I cut out the Easter eggs on my ScanNCut and added a ribbon bow to each. I glued one down and mounted the other with 3D foam pads for dimension.
I finished it off with some pale yellow sequins.

I don't really send Easter cards but think this is quite cute!
 
 
 
Images - Time For Tea Designs "Bonnie Hey Friend" and "Some Bunny Loves You"
Colouring Medium - Copic Markers
Papers - Nitwit Collections
Sentiment - Time For Tea Designs "Some Bunny Loves You"
Sequins - Little Things From Lucy's Cards
ScanNCut
Ribbon
Mini Pom Pom
3D Foam Pads
 
 

Thursday, 11 April 2019

Time For Tea Designs - Coffee Anyone?

Thursday and time for another Time For Tea DT post.
Today I'm using the coffee cup which is one of the accessory stamps from the Bonnie Hey Friend digi collection. It's the newest release and available in the T4T Designs shop now.
 
I coloured the cup with my copic markers and added the corrugated panel to the middle section along with some twine. I printed out some digi papers from Nitwit Collections called Coffee Time ( funny that eh?)
I stamped the coffee cup rings and coffee beans from a Just Rite stamp set called Coffee House and added a kraft corrugated panel across the middle .
I mounted the coffee cup using 3d foam pads. I added some little hearts and stamped one of the sentiments from the set on some kraft card.
 
 
 
Image - Time For Tea Designs "Bonnie Hey Friend"
Colouring Medium - Copic Markers
Papers - Nitwit Collections "Coffee Time"
Stamps - Just Rite "Coffee House"
Dies - Memory Box "Wrapped Stitched Rectangles"
Ink - Tim Holtz Distress Ink "Vintage Photo, Tea Dye"
Kraft Card
Marvy Uchida Paper Crimper
Twine
3D Foam Pads

Thursday, 4 April 2019

Time For Tea Designs - Bonnie Hey Friend

Thursday and time for another Time For Tea DT post.

Today I'm using Bonnie Hey Friend which is a new digi release and available in the T4T Designs shop now.

I decided to decorate a gift bag, so covered a kraft bag with some lovely papers. I bought the new Nitwit Collections "Spring Wellies" set. They are so lovely and another set to add to my (cough cough) number. 
I coloured Bonnie with my copics and paper pieced her dress adding some pleats with my copics to give it some depth. 
I printed out 3 of the little flower accessories which are part of the set. I added one to her hat and the other 2 to the sentiment tags. 
To finish off I used the Fantasy Frililea die to make the flower for the top corner.



Image - T4T Designs "Bonnie Hey Friend"
Colouring Medium - Copic Markers
Papers - Nitwit Collections "Spring Wellies"
Dies - Dawn Bibby "Fantasy Frililea"
Stamps - Paper Smooches
Kraft Bag
Flat Back Pearl

Thursday, 28 March 2019

Time For Tea Designs - A Purrfect Day

Thursday and time for another Time For Tea DT post.

I'm using three of the cute cats from the Mew Are Pawsome clear stamp set that's available in the shop. It's also available to buy with the matching dies too. 

Another card for the cat lovers in your life. I coloured them with my Copic markers and cut them out on my ScanNCut. I cut the shadow box frame die and mounted it with 3D foam tape on my patterned paper. I added the sentiment in the top right corner  and the cat with balloons in the top right corner. both are on 3D foam. The ginger cat I added to the bottom left corner but on the outside this time.. I added the die cut grass and sun in the bottom right corner and put the sitting cat in the grass. The little flowers are from another T4T Designs digi set called Gardening Emily And Ernie
I printed it out 4 times and scattered them around the card to finish it off.

Definitely Purrfect for those cat lovers!



Images - T4T Designs "Mew Are Pawsome" stamps
Colouring Medium - Copic Markers
Paper - Nitwit Collections "Up,Up & Away"
Dies - Creative Expressions, La La Land
ScanNCut
3D Foam Tape

Thursday, 21 March 2019

Time For Tea Designs - Painter Bonnie

Thursday and time for another Time For Tea DT post.
 
Today I'm using this fab Painter Bonnie digital stamp. What is even more fab is that you get a Copic Bonnie version too included. How great is that? We all love a bargain. So whether it's a copic crafty friend or a painter crafty friend you have an image for both! 
 
I coloured Bonnie with my Copic markers and added some dots with my white gel pen to her top and shoes. The white cardstock is a shiny textured card that looks like canvas which was perfect for the painting theme. I added a strip of paint splash paper down the left side. I cut the paint palette on my ScanNCut and added some coloured card candy as the paint. I finished it off with the sentiment from a Woodware set about crafting called Hanmade By.



Image - T4T Designs Painter/Copic Bonnie
Colouring Medium - Copic Markers
ScanNCut
Sentiment - Woodware "Handcrafted By"
Card Candy
White Gel Pen


Thursday, 14 March 2019

Time For Tea Designs - Happy Cat Mom Day

Thursday and time for another Time For Tea DT post.

If you know any cat lovers or crazy cat ladies then this digital stamp I'm using will be perfect for them. This is Happy Cat Mom Day and she's available to buy in the Time For Tea Designs shop.
I wanted to do an eclipse card, so coloured her with my copic markers and them cut out the MEOW on my ScanNCut. I then mounted the letters on 3d Foam tape. I then added it to my card blank that I matted with some dotty paper. I added a couple of bits of washi tape to the top right corner. The sentiment was printed on my PC.








Here's a close up.

Image - T4T Designs "Happy Cat Day Mom"
Colouring Medium - Copic Markers
ScanNCut
3D Foam Tape
Washi Tape

Cass xx




Thursday, 7 March 2019

T4T Designs - Beats Bella

Thursday and time for another Time For Tea DT post.
 
Today I'm sharing another one of Jo's new redux versions of an older image.  This is Beats Bella and she's available to buy in the shop.
As I love my rock music I decided to give her funky coloured hair, so went with this lovely teal colour. I printed out my music papers in a teal colour too so I could keep it all coordinated. I cut out the music frame and offset it on my card to the left and trimmed the excess off. The Music cut file I cut out in a darker teal cardstock x3 and glued them together to give some height. The LOTV sentiment which was perfect and a few little hearts to finish it off.
 
 

Image - T4T Designs "Beats Bella"
Colouring Medium - Copic Markers
Sentiment - LOTV
Dies - Amy Designs "Music Frame"
Music Word - ScanNCut

Cass xx