Saturday, 9 February 2019

Sweet Stampin' Challenge

Saturday and time for another
Sweet Stampin' Challenge
 
The theme from Team Wendy is
Valentine's
 
For my card I've used this fantastic stamp from Stamping Bella called Love Potion Oddball. I  love these oddball characters so much. I had coloured her up for The Daily Marker 30 Day Colouring Challenge on Instagram so she was ready to make into a card. Perfect for a quirky Valentine's card.

I cut an oval from a piece of white card  and doodled round the edge with a black fine liner. I embossed a piece of black card with the heartstrings embossing folder and placed it below the oval. I mounted the oddball on 3D foam pads to the right of the oval and the sentiment from the set to the left. I cut the Love die in red card and added it at the bottom left. Some little hearts to finish it off.

Have a lovely Valentine's Day however you celebrate it. (or don't)
 
 

Image - Stamping Bella "Love Potion Oddball"
Colouring Medium - Copic Markers
Embossing Folder - Heart Strings
Dies - The Works "Love" 
Black Fine Liner

 Don't forget to pop by the challenge blog and see all the fab DT creations from Team Wendy.

Remember you MUST  use a stamp (rubber or digi)
TFL
Cass xxx

Thursday, 7 February 2019

T4T Designs - Thank You Balloons

Thursday and time for another Time For Tea DT post.

It's an exciting time at Time For Tea Designs. Jo has just launched a new website with a new blog and website on it. There's also some new DT members join us. All links at the end of this post.

I'm using the bear from the Thank You Beary Much collection for my card. I've gone tall and thin for this card.I used the solid balloon from the set and coloured it two contrasting colours in my photo editing software and placed them over the digi paper then printed it out. Next I used the Balloon outline and printed it onto glitter card and mirror card and cut them out. I mounted them with 3D foam pads to give some dimension. I coloured the image with Copic markers and adhered him to the bottom of my card. I cut the sentiment on my ScanNCut and adhered it between the bear and the balloons. A few sequins to finish it off.

Don't forget to pop over to the new website and check it out.


 Image - Time For Tea Designs "Thank You Beary Much"
Colouring Medium - Copic Markers
Papers - Nitwit Collection "Up, Up And Away"
Sentiment - ScanNCut File
Glitter Card
Mirror Card
Sequins - Little Lucy's Things
3D Foam Pads

Cass xx

Thursday, 31 January 2019

T4T Designs - Hugs

Thursday and time for another Time For Tea DT post.

I've used this gorgeous image called Hugs and cropped her a bit. I coloured her with my Copic markers. I cut the jigsaw pieces out on my ScanNCut and adhered them in place on some grey card. I cut out the image using my wrapped stitched circles and mounted it on 3D foam pads. Once I had positioned my image I stamped the sentiment in the bottom left corner.

Pink and grey seem to be a popular colour combo for me at the moment!


  
Image - Time For Tea Designs "Hugs"
Colouring Medium - Copic Markers
Dies - Memory Box " Wrapped Stitched Circles"
Sentiment - Pink & Main  "To Pieces"
3D Foam Pads

Cass xx

Saturday, 26 January 2019

Sweet Stampin' Challenge

Saturday and time for another
Sweet Stampin' Challenge
 
The theme from Team Wendy is
Hat Tip to Burns Night
 
Show us your Scottish Kit
                        (Tartan, Nessie, Princess Merida, Scottish Food,
                Bagpipes, Whisky Drams)
 
I've used this cute Scottie Dog image from Fred She Said. I bought it ages ago and have never used it. I'm not even sure if they're still about.
I coloured him with my copic markers and cut him out with my stitched rectangle dies. I stamped the sentiment and added a strip of tartan card. Next I matted it onto the tartan card with 3d foam pads. Some thistles to finish it off.

 
 
Image - Fred She Said  "Scottie Dog"
Colouring Medium - Copic Markers
Dies - Stitched Rectangles
Craft Creations Tartan Card
Thistles
 
 Don't forget to pop by the challenge blog and see all the fab DT creations from Team Wendy.

Remember you MUST  use a stamp (rubber or digi)
TFL
Cass xxx

Thursday, 24 January 2019

T4T Designs - Purrfect Love

Thursday and time for another Time For Tea DT post.
I'm using two of the cute cats from the Mew Are Pawsome clear stamp set that's available in the Etsy shop. It's also available to buy with the matching dies too.
 
I coloured the kitties with my copic markers and cut them out. I added some Worn Lipstick Distress Oxide to my Gelli plate and brayered it over all the surface. I then pressed one side of the embossing folder into the Gelli plate and then lifted it off. Next I pressed my white cardstock down onto it and pressed firmly all over. When I lifted it it left this fab background. While that dried I printed the XO border on my PC and matted it onto some red cardstock. I printed the Purrfect sentiment from the stamp set onto some vellum and adhered it on top of the XO border. Once the background was dry I matted it onto some white and red cardstock and adhered my border in place. I then stuck the kitties in place mounted on 3D foam pads. I cut out the Love word arrow and stuck it in place. Finally some die cut hearts to finish it off.
 
Purrfect for that someone special!
 


 
 Images - T4T Designs "Mew Are Pawsome"
Colouring Medium - Copic Markers
Dies - The Works "Word Arrows"
Gelli Plate
Distress Oxide "Worn Lipstick"
Embossing Folder - Sue Wilson "Heart Strings"
Vellum
3D Foam Pads

Cass xx



Thursday, 17 January 2019

T4T Designs - I Woof You

Thursday and time for another Time For Tea DT post.

I'm using one of the cute dogs from the It's Pawty Time clear stamp set that's available in the Etsy shop. It's also available to buy with the matching dies too.

I started by stamping the dog, bone and I woof you sentiment using my Tim Holtz stamping platform and coloured it in with my Copic markers. I cut it out using the Avery Elle Wonky Stitched Rectangle and added a little die cut heart to the dog's head. I then used the same three stamps to make my backing paper. I stamped them all multiple times using Memento London Fog Ink. I didn't want it too in your face so chose not to use black. I matted it onto red card along with my image. I added a little washi tape tail under the image and then stamped some paw prints from the stamp set using black ink as I did want them to stand out.
A super cute card.


Image - T4T Designs "It's Pawty Time"
Colouring Medium - Copic Markers
Dies - Avery Elle "Wonky Stitched Dies
Washi Tape

Cass xx
 

Saturday, 12 January 2019

Sweet Stampin' Challenge

Saturday and time for another
Sweet Stampin' Challenge
 
The theme from Team Wendy is
Anniversaries
 
For my card I've used some new stamps I got this week. They're by Tracey Hey (Alpaca Pals) and this set is Rockin The Wreath. I chose to use the bunny and stamped one first and added the wreath. Once that was done I could used it to position the other. I wanted the wreaths to overlap. I used my Tim Holtz stamping platform to align them up. I also stamped the Me and You sentiments inside the wreaths along with the little hearts which are all part of the stamp set. The happy Anniversary was done on the PC. I coloured the cute little rabbits with my Copic markers. I then die cut it out using my stitched rectangles along with the patterned paper.
 
 

Image - Tracey Hey (Alpaca Pals) Rockin The Wreath Set
Colouring Medium - Copic Markers
Dies - Stitched Rectangles
Paper - Fancy Pants Designs

Don't forget to pop by the challenge blog and see all the fab DT creations from Team Wendy.

Remember you MUST  use a stamp (rubber or digi)
TFL
Cass xxx

Thursday, 10 January 2019

Time For Tea Designs - Thank You Beary Much


Thursday and time for another Time For Tea DT post.
I'm using the bear from the new release
 
My inspiration for this card was from cards I seen on Pinterest. I don't know about you but I can get lost on there for hours!
I coloured the bear with copic markers and cut him out. I printed the sentiment onto some patterned paper and cut it out using the balloon die from my MFT Blueprints 26 set. I inked some white card with Squeezed Lemonade and Spiced Marmalade Distress Oxides and them spritzed with some water. Once it was dry I placed the balloon and green Patterned paper in position and cut bothe layers out with the stitched die. I glued the hill piece on and mounted the balloon on 3d foam pads and added that.I then added the bear and balloon tie. Some sequins to finish it off.


Image - Time For Tea Designs "Thank You Beary Much"
Colouring Medium - Copic Markers
Papers - Echo Park
Dies - MFT "Blueprints 26"
Distress Oxides - Squeezed Lemonade, Spiced Marmalade
Sequins 
3d Foam Pads

Cass xx

Thursday, 3 January 2019

T4T Designs - New Year

Happy New Year!

Today is my first blog post of 2019 with my 
DT post.

I'm jumping ahead a month to February with a love themed card using the lovely Sweetheart digital stamp. I coloured her with my Copic markers and cut her out. I added a layer of kraft card to my card base and then the patterned heart paper from Fancy Pants. I've had it for years but still love it. I bought a few sheets at the time (as you do!)
I cut the two hearts out using the scalloped heart dies I got in The Works. They have some lovely dies and a great price. I then cut the love scrip word using the Memory Box die and added it to the white heart, and the red velvet heart to the kraft heart. I then trimmed down the doily and added it to the right of the card and mounted the image on 3d foam pads on top.


Image - T4T Designs "Sweetheart"
Colouring Medium - Copic Markers
Paper - Fancy Pants Designs
Dies - The Works "Scalloped Hearts"
Memory Box "Love"
Doily
Kraft Card
Anna Marie Designs White Corrugated Card
Velvet Heart Button